This is part of Family API which allow to create dual-os version of program runs under OS/2 and DOS

Note: This is legacy API call. It is recommended to use 32-bit equivalent

This call opens a new file, an existing file, or a replacement for an existing file. The opened file can have extended attributes.

Syntax

DosOpen2 (FileName, FileHandle, ActionTaken, FileSize, FileAttribute,

OpenFlag, OpenMode, EABuf, Reserved)

Parameters

;FileName (PSZ) - input : Address of the ASCIIZ path name of the file to be opened. ;FileHandle (PHFILE) - output : Address of the handle for the file. ;ActionTaken (PUSHORT) - output : Address of the action taken as a result of DosOpen2. ::0001H - File exists ::0002H - File created ::0003H - File replaced. ;FileSize (ULONG) - input : File's new logical size (EOD), in bytes. This parameter is significant only when creating a new file or replacing an existing file. Otherwise, it is ignored. ;FileAttribute (USHORT) - input : File attribute bits. Defined below: ::15-6 Reserved and must be zero. ::5 File archive ::4 Subdirectory ::3 Reserved and must be zero. ::2 System file ::1 Hidden file ::0 Read only file ::These bits may be set individually or in combination. For example, an attribute value of 0021H (bits 5 and 0 set to 1) indicates a read-only file that should be archived. ;OpenFlag (USHORT) - input : One-word field indicates the action to be taken if the file exists or does not exist. ::15-8 Reserved and must be zero. ::7-4 0000 = Fail if file does not exist. 0001 = Create file if file does not exist. ::3-0 0000 = Fail if the file already exists. 0001 = Open the file if it already exists. 0010 = Replace the file if it already exists. ;OpenMode (ULONG) - input : The OpenMode parameter contains the following bit flags: ::15 - DASD Open flag: :::0 = FileName represents a file to be opened in the normal way. :::1 = FileName is “Drive:” and represents a mounted disk or diskette volume to be opened for direct access. ::14 - Write-Through flag: :::0 = Writes to the file may be run through the file system buffer cache. :::1 = Writes to the file may go through the file system buffer cache but the sectors are written (actual file I/O completed) before a synchronous write call returns. This state of the file defines it as a synchronous file. For synchronous files, this is a mandatory bit in that the data must be written out to the medium for synchronous write operations. :::This bit is not inherited by child processes. ::13 - Fail-Errors flag. Media I/O errors are handled as follows: :::0 = Reported through the system critical error handler. :::1 = Reported directly to the caller by way of return code. :::Media I/O errors generated through an IOCTL Category 8 function always get reported directly to the caller by way of return code. The Fail-Errors function applies only to non-IOCTL handle-based file I/O calls. :::This bit is not inherited by child processes. ::12 - No-Cache/Cache flag: :::0 = It is advisable for the disk driver to cache the data in I/O operations on this file. :::1 = I/O to the file need not be done through the disk driver cache. :::This bit advises FSDs and device drivers whether it is worth caching the data. Like the write-through bit, this is a per-handle bit and is not inherited by child processes. ::11 - Reserved and must be zero. ::10-8 - The locality of reference flags contain information about how the application is to access the file. :::000 No locality known. :::001 Mainly sequential access. :::010 Mainly random access. :::011 Random with some locality. ::7 - Inheritance flag: :::0 = File handle is inherited by a spawned process resulting from a DosExecPgm call. :::1 = File handle is private to the current process. :::This bit is not inherited by child processes. ::6-4 - Sharing Mode flags. This field defines any restrictions to file access placed by the caller on other processes: :::001 Deny Read/Write access :::010 Deny Write access :::011 Deny Read access :::100 Deny neither Read or Write access (Deny None). Any other value is invalid. ::3 - Reserved and must be zero. ::2-0 - Access Mode flags. This field defines file access required by the caller: :::000 Read-Only access :::001 Write-Only access :::010 Read/Write access. :::Any other value is invalid. :::Any other combinations are invalid. ::File sharing requires the cooperation of sharing processes. This cooperation is communicated through sharing and access modes. Any sharing restrictions placed on a file opened by a process are removed when the process closes the file with a DosClose request. :::'Sharing Mode' :::Specify the type of access other processes may have to the file (sharing mode). For example, if it is permissible for other processes to continue reading the file while your process is operating on it, specify Deny Write. This sharing mode prevents other processes from writing to the file but still allows them to read it. :::'Access Mode' :::Specify the type of access to the file needed by your process (access mode). :::For example, if your process requires Read/Write access, and another process has already opened the file with a sharing mode of Deny None, your DosOpen2 request succeeds. However, if the file is open with a sharing mode of Deny Write, your process is denied access. :::If the file is inherited by a child process, all sharing and access restrictions are also inherited. :::If an open file handle is duplicated by a call to DosDupHandle, all sharing and access restrictions are also duplicated. ;EABuf (PEAOP) - input/output: Address of the extended attribute buffer, which contains an EAOP structure. An EAOP structure has the following format: ::fpGEAList (PGEALIST) - Address of GEAList. GEAList is a packed array of variable length “get EA” structures, each containing an EA name and the length of the name. ::fpFEAList (PFEALIST) - Address of FEAList. FEAList is a packed array of variable length “full EA” structures, each containing an EA name and its corresponding value, as well as the lengths of the name and the value. ;Error (ULONG):Offset into structure where error has occurred. :On input, the fpGEAList field and oError fields are ignored. The EA setting operation is performed on the information contained in FEAList. If extended attributes are not to be defined or modified, then EABuf must be set to null. Following is the FEAList format: ::cbList (ULONG) - Length of the FEA list, including the length itself. ;list (FEA) - List of FEA structures. An FEA structure has the following format: ::Flags (BYTE) - Bit indicator describing the characteristics of the EA being defined. :::7 Critical EA. :::6-0 Reserved and must be set to zero. If bit 7 is set to 1, this indicates a critical EA. If bit 7 is 0, this means the EA is noncritical; that is, the EA is not essential to the intended use by an application of the file with which it is associated. ;cbName (BYTE):Length of EA ASCIIZ name, which does not include the null character. ;cbValue (USHORT):Length of EA value, which cannot exceed 64KB. ;szName (PSZ):Address of the ASCIIZ name of EA. ;aValue (PSZ):Address of the free-format value of EA. :'Note:' The szName and aValue fields are not included as part of header or include files. Because of their variable lengths, these entries must be built manually. :On output, fpGEAList is unchanged. fpFEAList is unchanged as is the area pointed to by fpFEAList. If an error occurred during the set, oError is the offset of the FEA where the error occurred. The API return code is the error code corresponding to the condition generating the error. If no error occurred, oError is undefined. :If EABuf is 0x00000000, then no extended attributes are defined for the file. ;Reserved (ULONG) - input : Reserved and must be set to zero.

Return Code

;rc (USHORT) - return:Return code descriptions are: *0 NO_ERROR *2 ERROR_FILE_NOT_FOUND *3 ERROR_PATH_NOT_FOUND *4 ERROR_TOO_MANY_OPEN_FILES *5 ERROR_ACCESS_DENIED *12 ERROR_INVALID_ACCESS *26 ERROR_NOT_DOS_DISK *32 ERROR_SHARING_VIOLATION *36 ERROR_SHARING_BUFFER_EXCEEDED *82 ERROR_CANNOT_MAKE *87 ERROR_INVALID_PARAMETER *108 ERROR_DRIVE_LOCKED *110 ERROR_OPEN_FAILED *112 ERROR_DISK_FULL *206 ERROR_FILENAME_EXCED_RANGE *231 ERROR_PIPE_BUSY *99 ERROR_DEVICE_IN_USE

Remarks

A successful DosOpen2 request for a file returns a handle to access the file. The read/write pointer is set at the first byte of the file. The pointer's position may be changed by a DosChgFilePtr request or by read and write operations on the file.

The file's date and time can be queried by calling DosQFileInfo, and is set by calling DosSetFileInfo.

FileAttribute sets attribute bits for the file object. Attributes of an existing file can be queried and set by DosQFileMode and DosSetFileMode. A file's read-only attribute may also be set with the OS/2 ATTRIB command.

FileAttribute cannot be set to Volume Label. Volume labels cannot be opened. DosSetFSInfo may be issued with a logical drive number to set volume label information.

The FileSize parameter affects the size of the file only when the file is a new file or a replacement for an existing one. If an existing file is simply opened, FileSize is ignored. DosNewSize may be called to change the existing file's size.

The value in FileSize is a recommended size for the file. If allocation of the full size fails, the open may still succeed. The file system makes a reasonable attempt to allocate the new size in as nearly contiguous an area as possible on the medium. When the file size is extended, the value of the new bytes is undefined.

The DASD Open bit provides direct access to an entire disk or diskette volume, independent of the file system. This mode of opening the volume currently mounted on the drive returns a handle to the caller, which represents the logical volume as a single file. The caller specifies this handle with a DosDevIOCtl Category 8 Function 0 request to block other processes from accessing the logical volume.

The file handle state bits can be set by the DosOpen2 and DosSetFHandState requests. An application can query the file handle state bits as well as the rest of the Open Mode field, by calling DosQFHandState.

Extended attributes can be set by an EAOP structure in EABuf when creating a file, replacing an existing file, or truncating an existing file. No extended attributes are set when simply opening an existing file.

A replace operation is logically equivalent to atomically deleting and re-creating the file. This means that any extended attributes associated with the file are also deleted before the file is re-created.

Family API Considerations

Some options operate differently in the DOS mode than in the OS/2 mode. Therefore, the following restrictions apply to DosOpen when coding for the DOS mode: * OpenMode restrictions: The high word of OpenMode is ignored and is not error checked. Handles returned in response to DASD open are valid only for DosDevIOCtl. Inheritance flag is not supported in DOS 2.X. Write-Through flag must be set to zero. Fail-errors flag must be set to zero. Sharing mode field has meaning only if Sharing is loaded in DOS 3.X, ignored if Sharing is not loaded. Sharing mode is not supported in DOS 2.X. ** Access mode field has meaning only if Sharing is loaded in DOS 3.X, ignored if Sharing is not loaded. Access mode field is not supported in DOS 2.X. * Access mode is valid only if Sharing is loaded.

Bindings

C

<PRE> typedef struct _GEA { /* gea */

BYTE cbName; /* name length not including NULL */
CHAR szName[1]; /* attribute name */

} GEA;

typedef struct _GEALIST { /* geal */

ULONG cbList; /* total bytes of structure including full list */
GEA list[1]; /* variable length GEA structures */

} GEALIST;

typedef struct _FEA { /* fea */

BYTE fEA; /* flags */
BYTE cbName; /* name length not including NULL */
USHORT cbValue; /* value length */

} FEA;

typedef struct _FEALIST { /* feal */

ULONG cbList; /* total bytes of structure including full list */
FEA list[1]; /* variable length FEA structures */

} FEALIST;

typedef struct _EAOP { /* eaop */

PGEALIST fpGEAList; /* general EA list */
PFEALIST fpFEAList; /* full EA list */
ULONG oError;

} EAOP;

#define INCL_DOSFILEMGR

USHORT rc = DosOpen2(FileName, FileHandle, ActionTaken, FileSize,

FileAttribute, OpenFlag, OpenMode, EABuf,
Reserved);

PSZ FileName; /* File path name string */ PHFILE FileHandle; /* File handle (returned) */ PUSHORT ActionTaken; /* Action taken (returned) */ ULONG FileSize; /* File primary allocation */ USHORT FileAttribute; /* File Attribute */ USHORT OpenFlag; /* Open function type */ ULONG OpenMode; /* Open mode of the file */ PEAOP EABuf; /* Extended attribute buffer */ ULONG 0; /* Reserved (must be zero) */

USHORT rc; /* return code */ </PRE>

MASM

<PRE> GEA struc

gea_cbName db ? ;name length not including NULL

gea_szName db 1 dup (?) ;attribute name

GEA ends

GEALIST struc

geal_cbList dd ? ;total bytes of structure including full list

geal_list db size GEA * 1 dup (?) ;variable length GEA structures

GEALIST ends

FEA struc

fea_fEA db ? ;flags

fea_cbName db ? ;name length not including NULL
fea_cbValue dw ? ;value length

FEA ends

FEALIST struc

feal_cbList dd ? ;total bytes of structure including full list

feal_list db size FEA * 1 dup (?) ;variable length FEA structures

FEALIST ends

EAOP struc

eaop_fpGEAList dd ? ;general EA list

eaop_fpFEAList dd ? ;full EA list
eaop_oError dd ? ;

EAOP ends

EXTRN DosOpen2:FAR INCL_DOSFILEMGR EQU 1

PUSH@ ASCIIZ FileName ;File path name string PUSH@ WORD FileHandle ;File handle (returned) PUSH@ WORD ActionTaken ;Action taken (returned) PUSH DWORD FileSize ;File primary allocation PUSH WORD FileAttribute ;File Attribute PUSH WORD OpenFlag ;Open function type PUSH DWORD OpenMode ;Open mode of the file PUSH@ OTHER EABuf ;Extended attribute buffer PUSH DWORD 0 ;Reserved (must be zero) CALL DosOpen2

Returns WORD </PRE>

Family API
DOS	Process Manager	DosBeep DosExit DosSleep DosExecPgm
File Manager	DosChDir DosChgFilePtr DosClose DosDelete DosDupHandle DosMkDir DosMove DosQCurDir DosQCurDisk DosSetFileMode DosOpen DosQFileInfo DosRead DosQFileMode DosQFSInfo DosQVerify DosRmDir DosSelectDisk DosFindClose DosFindFirst DosFindNext DosSetFileInfo DosSetVerify DosWrite DosFileLocks DosSetFHandState DosNewSize DosBufReset DosQFHandState DosSetFSinfo DosShutdown
Memory Manager	DosFreeSeg DosSubAlloc DosSubFree DosSubSet DosAllocHuge DosAllocSeg DosReallocHuge DosReallocSeg DosGetHugeShift DosCreateCSAlias
NLS	DosCaseMap DosGetCtryInfo DosGetDBCSEv DosSetCtryCode DosGetCollate DosGetMessage DosInsMessage DosPutMessage
Date and Time	DosSetDateTime DosGetDateTime
Devices	DosDevConfig DosDevIOCtl DosDevIOCtl2
Signals	DosHoldSignal DosSetSigHandler
Misc	BadDynLink DosGetEnv DosGetMachineMode DosGetVersion DosError DosErrClass DosSetVec
KBD	KbdCharIn KbdFlushBuffer KbdGetStatus KbdSetStatus KbdStringIn KbdPeek
VIO	VioGetBuf VioGetConfig VioGetCurPos VioGetCurType VioGetPhysBuf VioReadCellStr VioReadCharStr VioScrollUp VioScrollDn VioScrollLf VioScrollRt VioScrUnLock VioSetCurPos VioSetCurType VioSetMode VioGetMode VioShowBuf VioWrtCellStr VioWrtCharStr VioWrtCharStrAtt VioWrtNAttr VioWrtNCell VioWrtNChar VioWrtTTY VioScrLock VioPopUp
Tools	BIND
Modules	DOSCALLS.DLL VIOCALLS.DLL KBDCALLS.DLL MSG.DLL
Libraries	API.LIB OS2386.LIB FAPI.LIB DOSCALLS.LIB SUBCALLS.LIB